Thepergola Ombréa 10x10 feet (approximately 3x3 meters) freestanding bioclimatic pergola should be installed on level ground, preferably with a concrete slab.
If you are creating concrete footings, we recommend a dimension of 10 x 10 inches (approximately 25 x 25 cm).
The hardware included in the package for attaching the pergola is intended for solid walls. To install it in hollow concrete blocks, you will need to use Molly bolts, nail-in anchors, or self-drilling anchors.
If you wish to purchase a blind or a slatted panel, we advise you to buy it and mount it at the same time as your pergola, so you can then secure everything to the ground.
In case your pergola is already fixed to the ground, it must be perfectly straight (check with a level) and the posts must be positioned at 90 degrees to be able to add an accessory without any problems.
It is advisable to keep the blades open in winter in case of snowfall and strong winds.
This pergola is likely subject to a building permit application. It is recommended to inquire at your municipality for any necessary procedures.
For a complete pergola tailored to your needs, you can add accessories:
- Up to 4 Blinds 10 feet (approximately 3 meters)
- Up to 12 slatted panels 3 feet (approximately 1 meter)
- Slatted panel 4 feet (for partial closure. This product is available in limited quantity until out of stock.) (approximately 1.2 meters)
- Slatted panel 4.3 feet (for partial closure) (approximately 1.3 meters)